Product Description

The salt spray test chamber produced by our company is used to test the corrosion resistance of the products after the surfaces of various materials have been subjected to corrosion treatment such as electroplating, anodizing, spraying, and anti-rust oil; in order to analyze the samples under specific environmental conditions and evaluation.

 

SPECIFICATION

 

Model	HMCCT612
Internal size	120x85x60 (WxDxH) cm
External size	215X135X172 (WxDxH) cm
Power supply	AC3ø   380V  30A  50HZ
Test box interior	The PP is integrally formed, the thickness is 8mm, and the temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time in the CASS, ACSS and NSS tests.
Thermostatic case	GRP and PVC gray temperature-resistant and impact-resistant board are used, and the PVC board mainly plays the role of protection and beautification.
Chamber upper cover	GRP is integrally formed, with a thickness of 5mm, and the temperature resistance of the material can reach -10~90ºC, so that our equipment will not be deformed for a long time under CASS, ACSS, and NSS tests (automatic opening and closing).
Test refill drum	Using PP white board, the capacity is 100L, independent and integrated
Test chamber basket frame	Using GRP temperature-resistant angle material, the angle can be 20°±5° from the product test angle, and the test bracket can be customized.
Saturated air drum	Made of SUS#304 stainless steel plate, thickness 2mm, with automatic water level controller to avoid the inconvenience of manual water addition.
Salt spray test method	(1) Laboratory: 35ºC±2ºC (2) Saturated air barrel: 47ºC±2ºC
Corrosion resistance test method	(1) Laboratory: 50ºC±2ºC (2) Saturated air barrel: 63ºC±2ºC
Corrosion resistance test method	Test room: 50ºC±1ºC; Saturated air drum:47ºC±1ºC
Drying test	Laboratory temperature: 30ºC~65ºC±1 Humidity: 30±5%RH and natural humidity
Wet test:	Laboratory temperature: RTºC~60ºC±2. Cooling time: 60~RTºC≤1ºC/min. Heating time: RT~60ºC≤1.5ºC/min Temperature deviation: ±2ºC Humidity: 20%-98±5%RH
Spray test	It adopts automatic pressurized spray salt water or pure water (according to customer requirements), and it is automatically discharged to the outside after the test, which can be customized according to requirements. (optional)
Condensation test	GB2423.3-93 "Basic Environmental Test Procedures for Electrical and Electronic Products" Test Ca: constant damp heat test method. (here is only a test that meets the specified temperature and humidity) (optional) a. Test temperature: 40~60ºC±2ºC. b. Test humidity: 95%~100%±2%RH.

Payment Terms︰ TT / LC

Product Image