Product Description

DESCRIPTION

 

The HMSAI series salt spray test chamber produced by our company is designed to test the corrosion resistance of the products after electroplating, anode treatment, spraying, anti-rust oil and other corrosion treatments on the surface of various materials; Make analysis and evaluation.

Test meets standards

GB/T10125-1997, GB/T10587-2006, GB/T1771-2007, GB10593.2-1990, QB/T 3826-1999 HMSAI-108,
HMSAI-270 (features: easy installation and operation, transparent top cover) micro cylinder device;
HMSAI-480, HMSAI-800, HMSAI-1440 enlarged salt spray test chamber (features: precise temperature control, automatic defogging device, uniform fogging)
 

Features

1. The whole machine is made of P.V.C hard plastic board, which is corrosion-resistant, easy to clean, and has no salt spray leakage.
2. Using a touch screen controller, multiple PID automatic calculations, high control precision, can set the working program, to achieve continuous or intermittent spray test.
3. The upper covers of the 108L and 270L test machines are all made of acrylic transparent top cover, and the top covers of models above 480L are made of hard PVC plastic plates. The upper cover is automatically opened and closed by a large cylinder, which can monitor the spray status and test at any time. Such working conditions.
4. Tower spray system, equipped with a salt liquid filter, no crystallization nozzle, uniform fog distribution, and free adjustment of settlement.
5. The number of samples (150*70mm). For example, 48 pieces can be placed at an angle of 15°, and 32 pieces can be placed at an angle of 30°.
6. After the test is completed, it has an automatic defogging device, which can clearly observe the sample.
7. Spray time: gap/continuous spray can be adjusted arbitrarily, multiple system protection, safe and reliable use.

 

 

SPECIFICATION

 

HMSAI series model		HMSAI108	HMSAI270	HMSAI480	HMSAI800	HMSAI1440
Inner box size mm	W	600	900	1200	1600	2000
	D	450	600	850	850	950
	H	400	500	500	550	600
Outer box size mm	W	1130	1460	1900	2300	2700
	D	630	910	1150	1150	1350
	H	1070	1280	1500	1550	1600
Working room volume (L)		108	270	480	800	1440
Salt water tank capacity (L)		15	25	90	90	120
Laboratory temperature		（NSSS）Test temperature： 35℃±1℃
Saturated barrel temperature		（NSS）Test temperature： 47℃±1℃
Brine temperature		35℃±1℃
Test solution		NSS：purified water + sodium chloride (PH6.5～7.2)
Compressed air pressure		2kgf/cm2	2kgf/cm2	6kgf/cm2	6kgf/cm2	6kgf/cm2
Power supply		AC 220V，1Ф, 50HZ

 

Configuration

1. Technical data: operation manual, product certificate, warranty card, etc.
2. Deliver a pack of wet ball gauze
3. Delivery of 2 bottles of sodium chloride
4. One distribution air supply pipe
5. Distribution of one exhaust pipe joint
6. A set of sealing plugs for distribution
7. Distribution of a salt water bucket
8. A set of V-shaped racks and material sticks for the distribution materials

Optional accessories

1. Control panel: Button type and LCD touch screen operation panel are optional
2. Working mode: steam heating (water boiling type) / anhydrous temperature control (dry burning type) optional
3. Salt water concentration meter
4. Air compressor

Payment Terms︰ TT / LC