Model No.︰TS-series
Brand Name︰HarmonyWOLRD/OEM/ODM
Country of Origin︰China
Unit Price︰-
Minimum Order︰1 pc
Product Discription
The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Characteristics
◆ Appearance: high texture appearance, the body adopts circular arc shape, the surface is processed by fog stripe, and adopts plane non-reaction handle, easy to operate, safe and reliable.
◆ Observation window: rectangular multi-layer glass viewing window, which can be used to observe the test products in the test. The window is equipped with anti-sweat electric heater, which can be used for waterproof gas condensation water drops, and high brightness PL glister light to keep the lighting inside the box.
◆ Water supply system: It is equipped with an external water supply system, which is convenient for supplementing the water supply in the humidifying drum and recycling automatically.
◆ Compressor: The compressor circulation system adopts French "Taikang" brand, which can effectively remove lubricating oil between condensing tube and capillary tube, and the whole series adopts environment-friendly cold coal (R404, 507).
◆ Control mode: intelligent PID+SSR/SCR positive and negative two-way synchronous output, including advanced slope control logic.
◆ Controller: with multi-segment program editing and temperature and humidity can do fast (OUICK) or slope (SLOP) control.
◆ System capacity: 150 groups of programs ×1500 sections can be logged in, the number of sections can be divided arbitrarily, and the programs can be freely connected to each other.
◆ Cycle setting: 9999×999 times cycles can be performed, and 5 separate cycles can be cut out.
◆ Time signal: 3 sets of timing control output interfaces, with 10 timing control modes, to facilitate the execution of timing planning for the start/stop of external driver components.
◆ Safety inspection: 15 items of full-function system detection to ensure safe operation of the machine.And can automatically display the time of failure, items and elimination countermeasures.
SPECIFICATION
|
Model |
TS-80-40M |
TS-150-40M |
TS-225-40M |
TS-408-40M |
TS-1000-40M |
|
Capacity |
80L |
150L |
225L |
408L |
1000L |
|
Interior size (cm)W*H*D |
40*50*40 |
50*60*50 |
50*75*60 |
60*85*80 |
100*100*100 |
|
Exterior size (cm)W*H*D |
93*131*81 |
100*155* 110 |
100*170* 120 |
110*180* 140 |
150*195* 165 |
|
Single maximum currently(A) |
8A |
10A |
13A |
14A |
24A |
|
Rated power(KW) |
3.5KW |
6KW |
7KW |
9KW |
13KW |
|
Weight(KG) |
260 |
310 |
320 |
400 |
700 |
|
Temperature range |
-40℃~+150℃ |
||||
|
Temperature stability |
±0.5℃ |
||||
|
Temperature uniformity |
±2.0℃ |
||||
|
Humidity range |
20%~98%RH |
||||
|
Humidity stability |
±1.5% |
||||
|
Humidity deviation |
≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH |
||||
|
Heating up |
heat up from -40℃ to +150℃,≤60mins |
||||
|
Cooling down |
cool down from +20℃ to -40℃, ≤40mins |
||||
|
Ambient temperature |
ambient temperature condition for the chamber working:+5℃~+35℃ |
||||
|
Exterior material |
1)stainless steel; 2)galvanized steel sheet bake finish |
||||
|
Interior material |
SUS304 stainless steel |
||||
|
Insulation technology |
outer rigid polyurethane foaminter glass fibre cotton |
||||
|
Refrigeration mode |
mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling |
||||
|
Refrigeration compressor |
totally enclosed plunger compressor imported from France (low noise/environment protection) |
||||
|
Refrigerant |
environment protection R404A(DuPont) |
||||
|
Circulating fan |
high temperature induction motorcentrifugal wind wheel |
||||
|
Heater |
high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater |
||||
