Product Description

DESCRIPTION

 

Use

The machine is specially improved for environmental testing.The tensile machine is equipped with a high and low temperature test box，which can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance in different temperature environments. When using the room temperature test, the high temperature box can be removed to increase the use of space and convenience.
 

Software function

Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; can conduct tensile, compression, bending, shearing, tearing and peeling test; use PC and interface board for data collection, preservation, processing and printing test result; can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.

Standards compliant

GB10586-89，GB/T7750-1987，GB2423.1-89，GJB150.3-86

 

SPECIFICATION

 

Capacity	10N、20N、50N、100N、200N、500N、1KN、2KN、5KN、10KN（Optional dual capacity configuration）
Temperature range	0，-20，-40，-60，-70℃～150℃
Display	Computer display mode
Force Resolution	1/500,000
Force Accuracy	0.3%
Stroke Resolution	1/500,000
Control Mode	All computer operation mode of tensile machine
Temperature control	PID automatic calculation, stable error
Display accuracy	0.1℃
Temperature accuracy	±1℃
Circulation System	Fan force circulation system
Heating System	SUS304 stainless steel heat radiation type of heater
Cooling System	Fan cooling type, high-efficiency compressor, environmental protection cooling medium
Protection Device	Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device
Chamber Material	SUS#304 stainless steel
Test Stroke	1300mm（Stand-alone operation of the tensile machine after the test box is removed）
Test Width	720mm（Stand-alone operation of the tensile machine after the test box is removed）
Chamber Dimension	40×40×80cm(W×D×H)
Test Speed	0.01～500mm/min set by computer, with up & down fast adjustment button of grips
Force Unit Switch	kgf，N，Ibf，g，ton，Mpa
Stop Mode	Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function
Machine Dimension	130×230×280cm(W×D×H)
Machine Drive	Servo motor drive, synchronous wheel and precision ball screw drive
Power	400W
Machine Weight	About 420kg
Power Supply	220V 50/60HZ 30A
Standard configuration	Clamp extension rod, heat sink, 1 set of fixture, computer software, USB computer connection
Optional	Personal computer

Payment Terms︰ TT / LC

Product Image